113 lines
3.3 KiB
C++
113 lines
3.3 KiB
C++
// Board: WiFiduino
|
|
|
|
#include <ArduinoMqttClient.h>
|
|
// #include <WiFiNINA.h>
|
|
#include <ESP8266WiFi.h>
|
|
// #include "arduino_secrets.h"
|
|
#include <PubSubClient.h>
|
|
|
|
///////please enter your sensitive data in the Secret tab/arduino_secrets.h
|
|
char ssid[] = VITRINE_SSID; // your network SSID
|
|
char password[] = VITRINE_WIFI_PASS; // your network password
|
|
|
|
WiFiClient espClient;
|
|
MqttClient mqttClient(espClient);
|
|
PubSubClient mqtt_client(espClient);
|
|
|
|
|
|
const char broker[] = "mqtt.klank.school";
|
|
int port = 8883;
|
|
const char topic[] = "real_unique_topic";
|
|
const char topic2[] = "real_unique_topic_2";
|
|
const char topic3[] = "real_unique_topic_3";
|
|
const char *mqtt_topic = "emqx/esp8266/led"; //
|
|
const char *mqtt_username = MQTT_ARDUINO_USERNAME;
|
|
const char *mqtt_password = MQTT_ARDUINO_PASS;
|
|
|
|
void setup() {
|
|
//Initialize serial and wait for port to open:
|
|
Serial.begin(9600);
|
|
while (!Serial) {
|
|
; // wait for serial port to connect. Needed for native USB port only
|
|
}
|
|
// attempt to connect to Wifi network:
|
|
Serial.print("Attempting to connect to SSID: ");
|
|
// WiFi.mode(WIFI_STA);
|
|
WiFi.begin(ssid, password);
|
|
|
|
while (WiFi.status() != WL_CONNECTED) {
|
|
delay(500);
|
|
Serial.println(". stil not");
|
|
}
|
|
|
|
Serial.println("You're connected to the network");
|
|
Serial.println();
|
|
|
|
Serial.print("Attempting to connect to the MQTT broker: ");
|
|
Serial.println(broker);
|
|
|
|
while (!mqtt_client.connected()) {
|
|
String client_id = "esp8266-client-" + String(WiFi.macAddress());
|
|
Serial.printf("Connecting to MQTT Broker as %s.....\n", client_id.c_str());
|
|
if (mqtt_client.connect(client_id.c_str(), mqtt_username, mqtt_password)) {
|
|
Serial.println("Connected to MQTT broker");
|
|
mqtt_client.subscribe(mqtt_topic);
|
|
// Publish message upon successful connection
|
|
mqtt_client.publish(mqtt_topic, "Hi EMQX I'm ESP8266 ^^");
|
|
} else {
|
|
Serial.print("Failed to connect to MQTT broker, rc=");
|
|
Serial.print(mqtt_client.state());
|
|
Serial.println(" try again in 5 seconds");
|
|
delay(5000);
|
|
}
|
|
}
|
|
|
|
Serial.println("You're connected to the MQTT broker!");
|
|
Serial.println();
|
|
|
|
// set the message receive callback
|
|
mqttClient.onMessage(onMqttMessage);
|
|
|
|
Serial.print("Subscribing to topic: ");
|
|
Serial.println(topic);
|
|
Serial.println();
|
|
|
|
// subscribe to a topic
|
|
mqttClient.subscribe(topic);
|
|
mqttClient.subscribe(topic2);
|
|
mqttClient.subscribe(topic3);
|
|
|
|
// topics can be unsubscribed using:
|
|
// mqttClient.unsubscribe(topic);
|
|
|
|
Serial.print("Topic: ");
|
|
Serial.println(topic);
|
|
Serial.print("Topic: ");
|
|
Serial.println(topic2);
|
|
Serial.print("Topic: ");
|
|
Serial.println(topic3);
|
|
|
|
Serial.println();
|
|
}
|
|
|
|
void loop() {
|
|
// call poll() regularly to allow the library to receive MQTT messages and
|
|
// send MQTT keep alive which avoids being disconnected by the broker
|
|
mqttClient.poll();
|
|
}
|
|
|
|
void onMqttMessage(int messageSize) {
|
|
// we received a message, print out the topic and contents
|
|
Serial.println("Received a message with topic '");
|
|
Serial.print(mqttClient.messageTopic());
|
|
Serial.print("', length ");
|
|
Serial.print(messageSize);
|
|
Serial.println(" bytes:");
|
|
|
|
// use the Stream interface to print the contents
|
|
while (mqttClient.available()) {
|
|
Serial.print((char)mqttClient.read());
|
|
}
|
|
Serial.println();
|
|
Serial.println();
|
|
} |